Make it stand out.

BUILDING TIPS:

Check the grooves to ensure that each is at a perfect 90-degree angle to the car body. A car with untrue axles tends to steer to one side or the other, causing it to rub up against the side of the lane strip, slowing it down. You can check the groove angles by using a square, a protractor, or even a piece of paper. Lay square on the block to check for squareness and alignment of the slot. Use two hacksaw blades side by side to redress the slots. Use the edge of the square as a guide.

Choose your favorite design, then mark the block accordingly. Lay car body on the side, then gently drive the axles into the grooves within 1/4″ of the axle head. Axles should fit tight. With a pair of pliers, remove axles by pulling and turning gradually. Repeat on the other side of the block. Most of the cutting can be done with a hand saw, then finished with sandpaper. Details such as fins and scoops should be added now. Any additional weight needed to achieve a total of 5 ounces should be built into the car. NOTE: If the car design you chose has a narrow body, make sure the area where the axles are inserted into the body remains 1-3/4″ wide, or wheels will not fit over the guide strips of the track.

PAINTING AND WHEEL ASSEMBLY:

Apply several coats of sanding sealer; then sand the entire car with fine-grade sandpaper. Give model at least two coats of fast-drying paint, in your choice of color. When the paint is completely dry sand with fine sandpaper, apply a final coat of paint, and allow to dry thoroughly. To finish, rub the entire car with a rubbing compound. Details such as windshield, driver, racing numbers, etc., should be added now. For a super finish apply a coat of auto wax and rub to a high gloss. Pre-lubricate axles and wheels using, dry powdered lubricant. Do not use regular oil or silicone spray, since it may soften the plastic. Slide wheels over axles, then gently tap them into the car body grooves with a 1/4″ dowel or similar object to within 1/32″ of car body. Make sure wheels turn freely.